User's Manual

ManualsBrandsCCP ManualsElectronics2.4G Basic Radio Control System with Servo Unit

EXTERNAL VIEW OF TRANSMITTER

When each lever is operated the action is confirmed with the sound of a buzzer beep.

You can hear this click sound when the setting position is changed.

HOLE FOR STRAP

HOW TO INSTALL THE BATTERIES

Push the finger point ,then slide the battery cover

Pay close attention to polarity of

batteries when installing.

Incorrectl

installed batteries

may cause damage to the

radio.

Do not mix different t

of batteries.

! Never allow batteries to leak.

Clean surfaces and avoid skin contact.

Then replace with new batteries.

TRANSMITTER

STEERING WHEEL(CH-1)

Turn to left and right

LED

BATTERY BOX

Be careful of sharp edges of the

battery terminals or springs.

TX SETTING BUTTON

Switch the transmitter on

pushing the set up button.

The LED will start to flash

slowl

indicatin

that it is in

POWER SWITCH

Slide to right to switch on.

Slide to left to switch off.

THROTTLE TRIGGER(CH-2)

Squeeze

the trigger to

accelerate. Push the trigger to

e brakes or reverse.

ANTENNA

Please handle with care to

reduce risk of damage.

THROTTLE TRIM

LEVER

Operates up and down

STEERING TRIM LEVER

Operates left and right

adjustment

CHARGING JACK

GRIP

THROTTLE REVERSE SWITCH

Switch between throttle forward and

backward direction

STEERING REVERSE SWITCH

Switch between steering left and right

direction

IMPORTANT!

Only charge batteries capable

of being recharged and

marked rechargeable.

Serious damage to equipment

will result in trying to charge

non-rechargeable cells.

Battery cover

Finger point