User's Manual

XV. T2 Parts List
Item Material Vendor Part #
Body Assembly:
Body (top and bottom) 6061 Aluminum DPM
Back Block 6061 Aluminum DPM
Body - Upper Tube
from the barrel:
Bolt Delrin DPM
Bolt Pin 17-4 DPM
Bolt Pin O-ring Buna-N McMaster N90-009
Detent Buna-N Spyder Detent
Attachment Screws 6/32 x ¼ Torx BHTC
Body - Lower Tube
from the pump:
Exhaust Valve Spring Stainless Steel Lee Springs LC-028D 11
Exhaust Valve Hat 6061 Aluminum DPM
Exhaust Valve O-Ring Buna-N McMaster N70-011
Exhaust Valve Pin 6061 Aluminum DPM
Exhaust Valve Body 6061 Aluminum DPM
Exhaust Valve Body O-ring Buna-N McMaster N70-011
Valve Retaining Nut 6061 Aluminum DPM
Valve Alignment Screw Stainless Steel McMaster 5/16 - 24 x 1/4 SS
Valve Retaining Nut Set Screw Stainless Steel McMaster 10-32 x 3/16 SS
Hammer Body Stainless Steel DPM
Hammer Sear Lug Stainless Steel Fastenal
1/4 - 28 x 5/8 SSCP (Turned at
the bottom)
Hammer Nylon Set Screw Nylon Fastenal 10-32 x 3/16
Main Spring Stainless Steel ¼-28 x 5/8 SSSCP
Back Cap 6061 DPM
Back Cap O-ring
I.V.G 6061 Aluminum DPM
I.V.G O-ring Buna N70-013
Pump Kit
From the pump handle
Pump Handle Delrin DPM
Pump handle Plate 6061 DPM
Pump Plate Screws Stainless Steel Fastenal 10-32 x 1/2 FHSCS
Guide Rod 17-4 DPM
Guide Rods 304 DPM
Pump Arm - Drilled and Tapped Stainless Steel DPM
Back Block 6061 Aluminum DPM
Back Block Screws 6-32 x 3/8 BHTC