User's Manual

Regulator Disassembly and Maintenance:

Assembled Regulator

(CCM® has had various models of this regulator – the internals have not changed

significantly.)

Disassembled Regulator

(From Right: to Left: 3/16

Adjustment Screw, Regulator Housing Bottom, Regulator Spring

Seat, Spring, Regulator Piston and O-Ring, Poppet Nut, Poppet Seat, Poppet Pin, Poppet

Spring, Regulator Housing Top, O-Ring.)

1. Unscrew the halves of the regulator. CCM® has machined flats into the

bottom of the regulator to assist in disassembly however, this is often not

necessary to use. If you do, use some sort of protection so that you do

not mar the anodizing.