User's Manual

XII. Maintenance:
From time to time, it may be necessary to clean or replace worn parts within the
marker. For this, you will need to break down the marker further than the regular
maintenance lists above. This section will be broken into subsections: The Grip
Frame, the Chassis, and the regulator. I will assume the marker has been
degassed, the barrel has been removed and the marker checked for residual air
and paint. Be SAFE!
Tools Needed:
A full set of American Allen Keys.
A T-10 Torx Wrench
Autococker® Valve Tool
Spanner (Crescent Wrench)
Q-Tips©
Needle Nose Pliers
Small Socket Set (optional)
Quality Lubricant – I use KC Concepts® Blue oil
Quality Grease - Dow® 55 or Hater Sauce®.
Grip Frame Disassembly and Maintenance:
1. Remove the grip screws (4 - 5/64
th
) and the grip panels.