User's Manual

Disassembled Regulator
(From Right: to Left: 3/16
th
Adjustment Screw, Regulator Housing Bottom, Regulator Spring
Seat, Spring, Regulator Piston and O-Ring, Poppet Nut, Poppet Seat, Poppet Pin, Poppet
Spring, Regulator Housing Top, O-Ring.)
1. Unscrew the halves of the regulator. CCM® has machined flats into the
bottom of the regulator to assist in disassembly however, this is often not
necessary to use. If you do, use some sort of protection so that you do
not mar the anodizing.
2. Use a spanner (or a 3/8
th
inch socket) to remove the Regulator Pin
Retainer.
3. Carefully dump out the rest of the pieces from the top of the regulator.