User's Manual

16. Clean these parts completely and reassemble.
NOTE: When reassembling the Valve Assembly – stack the Valve Spring,
Valve, and Valve body, and Valve Retaining Nut on top of the
Autococker® Valve Tool and slide the body over this assembly. Be sure
not to cross thread the Valve Retaining Nut into the Chassis of the marker
upon reassembly. Take your time, go slow, and get help from a qualified
airsmith if you do not know what you are doing.
Regulator Disassembly and Maintenance:
Assembled Regulator
(CCM® has had various models of this regulator – the internals have not changed.)