User's Manual

This is the Series 5 Basic’s VRA. The S6’s has a small guide rod attached.
depth upon reassembly. It will make timing the marker much easier.
7. The VRA has one static o-ring – which I lightly lubricate upon reassembly.
8. Note the depth of the Lug before disassembly. You want to replicate this
The main spring will also come out at this point.
9. Remove the IVG from the marker (1/8
th
Allen Key) noting its depth from
flush to the rear of the body. About 2 full turns or 2.5 turns are normal.