User's Manual

XIV. Maintenance:
From time to time, it may be necessary to clean or replace worn parts within the
marker. For this, you will need to break down the marker further than the regular
maintenance lists above. This section will be broken into subsections: The Grip
Frame, the Chassis, and the regulator. I will assume the marker has been
degassed, the barrel has been removed and the marker checked for residual air
and paint. Be SAFE!
Tools Needed:
A full set of American Allen Keys.
Autococker® Valve Tool
Spanner (Crescent Wrench)
Q-Tips©
Needle Nose Pliers
Small Socket Set (optional)
Quality Lubricant – I use KC Concepts® Blue oil and Dow® 55 Grease.
NOTE: All of the reference photos currently show the Series 5 Basic. The premise is the
same on the S6
Grip Frame Disassembly and Maintenance:
1. Remove the screw that attaches the auto trigger arm and cam to the frame.