User's Manual
5
MOUNTING GUIDELINES
1. Install the wireless 7-IN-1 sensor at least 1.5m o the ground for better and more accurate
wind measurements.
2. Choose an open area within 150 meters from the LCD console.
3. Install the wireless 7-IN-1 sensor as level as possible to achieve accurate rain and wind
measurements.
4. Mount the wireless 7-IN-1 sensor with the wind meter end pointing to the North to correctly
orient direction of the wind vane.
A. Mounting on pole (Pole Diameter 1"~1.3")
(25~33mm)
B. Mounting on the railing
SETUP THE CONSOLE
Your console can pairing up with the wireless 7-IN-1 wireless weather sensor and up to 7 optional wireless
sensors. (Not included)
INSTALL THE BACKUP BATTERY
1. Detach the table stand
2. Remove the battery door of the console.
3. Insert a new button cell battery.
4. Replace the battery door.
NOTE:
The backup battery can backup: Time & Date, Max/Min & Past 24 hours weather records, Alert
setting values, oset value of weather data and sensor(s) channel history.
The built-in memory can backup: Router setting and Weather server setting
POWER UP THE CONSOLE
1. Plug the power adapter to power up the console.
2. Once the console power up, all the segments of the LCD will be shown.
3. The console will automatically start AP mode.