Use and Care Manual

CLEANING AND MAINTENANCE
Drainage method
Maintenance
This product is provided with automac water evaporaon system. Condensate circulaon cools
condenser. This not only improves refrigerang efficiency, but also saves energy.
If water container inside the machine is full of water, the display screen will flash show “FL” with
sound alarm, compressor stops operaon automacally. At the moment water should be drained,
and the specific steps are as follows:
Attention:
To prevent electric shock, please turn of the air condioner and disconnect plug before
maintenance or repair.
1. Disconnect power line plug, and remove exhaust pipe assembly;
2. Move the air condioner to an appropriate locaon;
3. Pull out water plug at water outlet to drain all the water inside the
machine;
4. Stuff up water plug again;
5. Re-install exhaust pipe assembly, and start the machine.
Cleaning off machine body
1. Please disconnect plug before cleaning.
2. Scrub with so semi-dry cleaning cloth. Do not use chemical
reagents, such as benzene, alcohol and gasoline, etc., otherwise, the
surface of the air condioner, and even the whole machine will be
damaged.
3. Do not splash water into the air condioner.