Use and Care Manual

Under cooling mode, press “Timer” + “ ” buttons together, the unit auto enter into “Sleep” Mode.

3) Adjust temperature

The temperature can be set within a range of 62.6-86℉(17-30℃) under cooling mode.

Press or buttons to increase or decrease the temperature 1.8℉(1℃) by pressing once.

Press and buttons together to convert Celsius degrees and Fahrenheit degrees and corresponding

indicator will light up.

4) Adjust fan speed

Press the button to select a desired fan speed shown below

5) Stand-by

Press the button again, the unit will stop working with reminding music sounded, will be in red color.

Notice: Working principle for each mode and function

1. Cool mode:

 When room temperature is 1.8℉(1℃) higher than setting temperature, the compressor and fan will start

working.

 When room temperature is 1.8℉(1℃) lower than setting temperature, the compressor will stop working and

fan keep working at original speed.

 Room temperature can be set within a range of 62.6-86℉（17-30℃） and fan speed can be adjusted to high

or low level.

2. Fan mode:

 Fan runs at set speed and can be adjusted to high or low, compressor do not work.

 Room temperature will automatically show on LED display with range 50-95℉（10-35℃）.

 Room temperature can’t be adjusted.

3. Dehumidify mode:

 Fan runs at low speed automatically, fan speed and room temperature can’t be adjusted.

 Room temperature will automatically show on LED display with range 50-95℉（10-35℃）

4. Sleep mode:

 Under cooling mode, press “Timer” + “ ” buttons together, the unit auto enter into “Sleep” mode.

 Fan will turn to low speed automatically and can’t be adjusted.

 Set temperature will increase 1℃ when unit running in 2 hours, increase 1.8℉(1℃) again in another

2-hour working, then keep set temperature unchanged further.

 Room temperature will automatically show in LED display with range 50-95℉（10-35℃）.

5. Timer Operation

 Press “Timer” button to set automatic OFF time while unit is running.

 Press “Timer” button to set automatic ON time while unit is off.

 The time can be adjusted within a range of 1-24 hours, press or buttons to increase or decrease

1 hour by pressing once.