Use and Care Manual

13
Handle position
Handle position
`
 Clean the filters gently in warm water (about 104℉（40℃）) mixed with detergent, and dry in the shade (as
Photo).
 push filter in even force gently into correct place to avoid any damage.
Notes:
 Do not squash the mesh.
 Do not hit the mesh with sharp objects or brush.
End of Season Storage
1. Screw off the drain cover, and then pull out the stopper to drain water completely.
Note: the tilt angle of the unit must be≦30 degrees.
2. Keep the unit running in fan mode half day to dry inside of unit completely to prevent from going mouldy.
3. Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug into the
universal fixing hole at the back panel of the unit, install the water plug and drain cap.
4. Remove the heat exhaust hose assembly, clean and keep it properly.
Notes:
 Hold the exhaust hose assembly with both hands when removal.
 Push the fasteners aside on exhaust air outlet using your thumbs, then pull out exhaust hose assembly.
5. Pack the air-conditioner properly with soft plastic bag and put it in dry place with appropriate dust-proof
measures and keep the unit away from children.
6. Take out the batteries from the remote control and keep unit in a try place, including all accessories well.