Use and Care Manual

12
2. Continuous drain:
1) Screw off the drain cover and unplug the water stopper (as Photo).
2) Connect drain-hole with φ13mm PVC drain hose, as deep as possible to avoid leakage (as Photo).
3) Pull the drain hose to bathroom or outdoor.
Notes:
 Drain hose must be installed before unit starts working.
 It is suggested to use manual drainage when unit in cooling mode, to ensure enough water to recycle in the
unit to cool condenser and enhance cooling performance.
 Put the drain hose in an inaccessible place, not higher than drainage hole and keep drain hose straight without
any flexure.
 Keep the drain cover and its stopper properly installed when continuous drainage is adopted.
Maintenance and Service
Remark: Turn off the unit and pull out the plug before maintain or send the unit to service center.
1. Surface cleaning
Clean the unit surface with wet and soft cloth, but do not use chemical solvents such as alcohol and gasoline to
avoid any damage to unit.
2. Filter cleaning
Clean the filter every two weeks, otherwise it would influence the unit performance if filter clogged with dust.
 Grip the filter handle and take it out gently in correct direction (as Photo).
Drain Cover
Drainage Hole
Drain hose
Drain cap
Drain Hole