Use and Care Manual

10
Keep the right direction of slant side A of adapter, for ease installation of window seal-plate.
Keep exhaust hose assembly be strongly locked by fasteners in exhaust outlet to avoid its fall off
1.3 Installation of window seal-plate
1) Open the window in half, put the seal-plate into window, determine in vertical or horizontal position according to
window open direction. (As Photo)
2) Extend seal plate parts, adjust it to the length of window and fix it with screws then.
Remarks:
1 Installation of window seal-plate
Open the window in half, put the seal-plate into window,
Extend seal plate parts and adjust it to the length of window, fix it with screws then.
1.4 Installation of the unit
1. Move the unit together with its exhaust ho
se assembly in front of the window and keep the unit at least 50cm
away from
the walls or other objects. (As Photo).
2. Install the rectangle end of exhaust hose adapter into the corresponding rectangle hole in window seal-plate
assembly, fix it with screw and close the window (as Photo).
A. Align the 4 openings on window seal-plate with corresponding 4 openings on exhaust hose adapter and
set them together, then slide adapter downwards, to make 2 set of openings locked for 2 parts good
connection.