Use and Care Manual

9
This air-conditioner may be moved indoors conveniently; keep the unit in upright position while moving it.
The air-conditioner shall be placed on flat surface.
Do not install or operate this air-conditioner in bathroom or other wet environments.
1.1 Installation of exhaust hose assembly and its adapter
1) Take out the exhaust hose assembly and its adapter from plastic bag.
2) Extend the exhaust hose at one end, screw the round end of adapter into exhaust hose at anticlockwise
direction (as Photo)).
Note: Screw adapter into right position, at least 3 laps, to keep good connection of exhaust hose assembly and its
adapter (as Photo).
1.2 Installation of the exhaust hose
assembly into unit
1) Determine window seal-plate position, vertical or horizontal direction.
2) If window seal-plate will be in horizontal position, the slant panel A of adapter should be upwards.
3) If window seal-plate will be in vertical position, and will be at left side of window, the slant panel A of adapter
should be at right direction.
4) If window seal-plate will be in vertical position, and will be at right side of window, the slant panel A of adapter
should be at left direction.
1. Take two ends of exhaust hose and its adapter assembly (as Photo).
2. Put front end of exhaust hose assembly onto jugged position of exhaust outlet of back panel (as Photo).
Remark: Keep the right direction of slant side A of adapter, for ease installation of window seal-plate.
3. Hold the unit by one hand, carry the exhaust hose assembly with another hand and push it into unit gently, for
good lock of two parts. (as Photo)
Remarks: