User Manual

6
Common Troubleshooting Methods
Abnormal
symptom
Cause
Solution
Indicator not
illuminated with
no air and no
mist
•The power cord is not
properly plugged in or the
power switch is not turned
on
•Plug the power cord
properly into a working
outlet, turn on the power
switch
Indicator
illuminated with
air and no mist
•There is no water in the
water tank
•The Mist Control Dial is not
turned up
•The water level float cap is
not down releasing water
•Fill up the water tank
•Turn Mist Control Dial
clockwise
•Confirm the water tank
spring float cap is not stuck
Mist with odor
•New unit
•The water in the tank is not
clean
•Open and clean the water
tank
Indicator is
illuminated with
no air or no fog
•The water level in the
water bath is too high
•Remove some water in the
unitʼs water basin
•Screw down the water tank
spring float cap
Reduced mist
output
•There is scale formation on
the transducer
•The water is dirty or has
been stored too long
•Clean the water basin and
inlets
•Replace with clean water