User Manual

4
OPERATION
With the Power Control Knob in the OFF position, plug the humidifier into a
polarized 120VAC outlet.
The best working environment for humidifier is between the temperatures of 41°F
(5°C) and 104°F (40°C) and relative humidity is lower than 60%RH. Use the
ON/OFF switch on the back of the unit to turn it on or off. Turn the Mist Control Dial
on the front of the unit to adjust the mist output. The top of the tank has dual
directional output orifices; simply turn the openings to the desired directions.
REFILLING THE TANK
When the tank is empty and the water reaches a minimum level in the tray, the unit
will automatically shut down and stop producing moisture. The green power
indicator light will turn to red color indicating that the tank is empty. Turn off and
unplug the power cord. Remove water tank spring float cap, refill the tank with
cool water, for best results, use distilled or filtered water. Do not use hot water or
chemical additives. Properly replace the tank, plug into an outlet and turn the
humidifier ON. Comfortable, soothing, visible cool mist will be produced
immediately.
CLEANING THE HUMIDIFIER
It is strongly recommended you clean your humidifier at least once a week or more
often if you
 Have hard water.
 Notice a buildup of impurities on or in the tray, etc.
 Notice an unpleasant odor.
Always turn off and unplug the humidifier before cleaning.
Periodically wipe the outside of the humidifier with a damp or wet soft cloth. Do not
use harsh, abrasive cleaners on this humidifier. Never submerse the housing in
liquid or pour liquid in or on the housing. Doing so may damage the humidifier and
cause injuries.