User manual CC_SHBR12

ManualsBrandsCC-SMART ManualsBrushed DC Motor ControllersDual DC Driver for RC In Mixed Mode, Esc Brush, ESC DC, Brushed Motor Driver, Motor Controller

Cc-Smart Technology Co., Ltd

UART Parameter ...................................................................................................................................... 9

UART Command: ....................................................................................................................................... 9

5. Configuration: .................................................................................................................................... 10

DIP SWITCH MODE Configuration: ...................................................................................................... 10

Acceleration/Deceleration Configuration: .......................................................................................... 10

6. Protection & Indication Feature: ...................................................................................................... 11

Protection:.............................................................................................................................................. 11

Indication: .............................................................................................................................................. 12

7. ENABLE/STATUS Pin Feature: ......................................................................................................... 12

8. Recommendation: ............................................................................................................................. 12

Wire Gauge ............................................................................................................................................. 12

System Grounding ................................................................................................................................. 13

Power Supply Connection ..................................................................................................................... 13

1. Introuduction, Features and Applications

Introduction

The driver is H-Bridge Driver which is designed to control a brushed DC motor about the

Velocity, Direction... The Motor is controlled by MOSFETs with 16 Khz switching to optimum

performance and noise.

The driver is Smart H-Bridge Driver witch support Acceleration/Deceleration feature.

This feature will help protect the Electric, Mechanical…It will useful for many applications.

The driver also support two Electric Current Home Sensor inside to limit the moving left

and right. The user don’t need add more extended limit switch. This driver will monitor the

current when the Motor running, if the current of the Motor same as with the iLimit (iLimit is a

current limit setting by potentiometer in PCB), the driver will set a Touched Flag and stop moving

that direction. To moving, the driver need control by reverse direction or the Touched Flag need to

be clear.

The driver support many protection method as Under voltage, Over voltage, Over temperature,

Over Current. These protects feature are very important witch help to keep protection system.

Special, The Smart H-bridge support all most common communication methods. The user is easy to

choose that method by the Dip Switch in Pcb:

 PWM/Dir

 PWM Bi-direction