User Manual

26
Perform one of the following to specify how you want to establish a network
connection.
If you want to connect using a username and password, choose User Name
and Password.
If you want to connect using a user certificate installed on your computer,
choose Certificate, select a certificate from the drop-down box and go to Step
6.
Specify the username and password for inner PEAP tunnel authentication:
Check Use Windows User Name to use the Windows user name as the PEAP
user name.
OR: Enter a PEAP user name in the User Name field to use a separate user
name for the PEAP authentication process.
Click Settings. The Configuration Setting window appears.
Leave the Specific Server or Domain field blank to allow the client to accept a
certificate from any server that supplies a certificate signed by the certificate
authority listed in the Trusted Root Certification Authorities drop-down box on
the Define PEAP (EAP-MSCHAP V2) Configuration window (this is the
recommended option) or enter the domain name of the server from which the
client will accept a certificate.
If the Login Name field is not filled in automatically, enter your username with
nothing after it.
Click OK.
Enable the profile.
LEAP
To use security In the Atheros Client Utility, access the Security tab in the
Profile Management window.
LEAP security requires that all infrastructure devices (e.g. access points and
servers) are configured for LEAP authentication. Check with the IT manager.
Configuring LEAP
Enabling LEAP