User Manual

16
To add a new configuration profile, click New on the Profile Management tab.
To modify a configuration profile, select the configuration from the Profile list
and click the Modify button.
To configure a profile for ad hoc or access point (infrastructure) mode, edit the
Network Type field on the Advanced tab.
Note that the ACU only allows the creation of 16 configuration profiles. After
the creation of 16 profiles, clicking the New button displays an error
message. Remove an old profile or modify an existing profile for a new use.
b. Remove a Configuration Profile
1. Go to the Profile Management tab.
2. Select the profile to remove from the list of configuration profiles.
3. Click the Remove button.
c. Activate a Configuration Profile
1. To switch to a different profile, go to the Profile Management tab.
2. Click on the profile name in the Profile List.
3. Click the Activate button.
The Profile List provides icons that specify the operational state for that profile.
The list also provides icons that specify the signal strength for that profile.
d. Import and Export Profiles
Importing a Profile :
1. From the Profile Management tab, click the Import button. The Import
Profile window appears.
2. Browse to the directory where the profile is located.
3. Highlight the profile name.
4. Click Open. The imported profile appears in the profiles list.
Exporting a Profile :