User Manual

15
Control
Frequency
Displays control frequency the station is
using. Available for 802.11n devices only.
Extension
Frequency
Displays extension frequency the station is
using. Available for 802.11n devices only.
Channel Set Shows the current channel set.
Channel Width Shows the channel width. Available for
802.11n devices only.
QoS The type of quality of service that is currently
being used by your client adapter. QoS on
wireless LANS (WLAN) provides
prioritization of traffic from the access point
over the WLAN based on traffic
classification.
A value of None represents that the WMM
standard QoS is not enabled. A value of
WMM represents that a component of the
IEEE 802.11e WLAN standard for QoS is
enabled.
5.2.2 Profile Management
Configure the wireless network
adapter (wireless card) from the
Profile Management tab of the
Atheros Client Utility.
a. Create or Modify a Configuration Profile