User Manual

14
11n MIMO
Power Save
Shows the MIMO power save mode status.
Available for 802.11n devices only.
Power Save
Mode
Shows the power save mode. Power
management is disabled in ad hoc mode.
Configure the power save mode on the
Advanced tab.
Current Power
Level
Displays the transmit power level rate in
mW. Configure the transmit power level on
the Advanced tab.
A
vailable
Power Levels
Shows the 2.4 GHz available power levels.
Current Signal
Strength
Shows the current signal strength in dBm.
Current Noise
Level
Displays the current noise level in dBm.
Up Time Shows how long the client adapter has been
receiving power (in hours:minutes:seconds).
If the adapter runs for more than 24 hours,
the display shows in
days:hours:minutes:seconds.
802.11b
Preamble
Displays the 802.11b preamble format.
Configure the preamble format on the
Advanced tab.
Current
Receive Rate
Shows the current receive rate in Mbps.
Current
Transmit Rate
Displays the current transmit rate in Mbps.
Channel Shows the currently connected channel.
Control
Channel
Shows the current control channel. Available
for 802.11n devices only.
Extension
Channel
Shows the extension channel. Displayed
only if the STA is connected in a 40 MHz
channel. Available for 802.11n devices only.
Frequency Displays frequency the station is using.