User's Manual

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 2.2

previous configuration setting.

3.3.6 LAN Interface Setup

This page is used to configure the parameters for local area network that connects

to the LAN ports of your WLAN Broadband Router. Here you may change the

setting for IP address, subnet mask, DHCP, etc.

Screenshot – LAN Interface Setup

Item Description

IP Address

Fill in the IP address of LAN interfaces of this WLAN

Broadband Router.

Subnet Mask

Fill in the subnet mask of LAN interfaces of this WLAN

Broadband Router.

Default Gateway

Fill in the default gateway for LAN interfaces out going

data packets.

DHCP Server

Select to enable or disable the DHCP server function on

LAN interfaces from pull-down menu.

DHCP Client Range

Fill in the start IP address and end IP address to allocate a

range of IP addresses; client with DHCP function set will

be assigned an IP address from the range.