User's Manual

USER’S MANUAL OF WLAN ACCESS POINT Version: 2.1

1 Introduction

The Wireless LAN Access Point is a portal that can act as the connection point between the

Ethernet CSMA/CD protocol and the wireless CSMA/CA protocol. The Access Point can be

easily integrated into your existing wireless network. In large installations, the roaming

functionality provided by multiple Access Points allows wireless users to move freely

throughout the facility while maintaining seamless, uninterrupted access to the network.

This document describes the steps required for the initial IP address assign and other AP

configuration. The description includes the implementation of the above steps.

Notice: It will take about 25 seconds to complete the boot up sequence after powered on

the WLAN Access Point; all LEDs are blank while booting except the Power

LED, and after that the WLAN Activity LED will be flashin

to show the WLAN

interface is enabled and working now.

1.1 Package contents

The package of the WLAN Access Point includes the following items,

 The Access Point

 The AC to DC power adapter

 The Documentation CD

1.2 Product Specifications

Product Name WLAN Access Point

Standard 801.11b(Wireless), 802.3(10BaseT), 802.3u(100BaseT)

Data Transfer Rate 11Mbps(Wireless), 100Mbps(Ethernet)

Modulation Method DBPSK/ DQPSK/ CCK

Frequency Band 2.4GHz – 2.497GJz ISM Band, DSSS

RF Output Power < 17 dBm

Receiver Sensitivity 11Mbps better than 8% PER @ -80 dBm

Operation Range 30 to 300 meters (depend on surrounding)

Antenna External Antenna

LED Power, Active (WLAN), Act/Link (Ethernet)

Security 64 bit/ 128 bit WEP, MAC address filtering

LAN interface One 10/100BaseT with RJ45 connector

Power Consumption 7.5V DC Power Adapter