User's Manual

WLAN USB Dongle User’s Guide
45
want to use.
Peer-to-Peer Channel
When you choose Peer-to-Peer as the Network Type, you have to set the
channel number you want to use.
Transmit Rate
The transmission rate at which client of AP transmits the data packets. You
can set this to Auto 1 or 2Mb, 5.5Mb, 11Mb or Fully Automatic.
“OK” button
This button becomes active only when one of the fields has been modified.
Pressing this button applies the changed values to the driver and saves them
to the registry and is used the next time the computer boots up
Encryption Tab
You may want an additional measure of security on your wireless network,
which can be achieved by using WEP (Wired Equivalent Privacy) encryption.
WEP encrypts each frame transmitted from the radio using one of the Keys
entered in this panel.
When an encrypted frame is received it will only be accepted if it decrypts
correctly. This will only happen if the receiver has the same WEP Key used
by the transmitter.
To be written to the driver and registry, each key must consist of hex digits,
which means that only digit 0-9 and letter A-F are valid entries.
You can set this to disable, 64 bits or 128 bits.
Encryption WEP – Disabled
The default is Disabled .