User's Manual

WLAN USB Dongle User’s Guide

Profile Name

Each Profile represents specific settings of the USB Dongle. You can set the

settings for each profile. Next time when you want to change the USB Dongle

settings, you can just select the profile you want to use.

Network Name

Network Name is the group name (or SSID) that will be shared by every

member of your wireless network. You will only be able to connect with an

WLAN device that has the same Network Name.

Network Type

This field allows you to select from a list of supported Network Types. The

types displayed have two values: “Access Point” and “Peer-to-Peer”.

Access Point -

The infrastructure mode of operation requires the

presence of an 802.11b Access Point. All

communication is done via the Access Point, which

relays packets to other wireless clients in the BSS as

well as to nodes on a wired network such as Ethernet.

Peer-to-Peer -

This is the 802.11b Ad Hoc mode of operation. All

communication is done from Client to Client without the

use of an Access Point. 802.11 Ad Hoc network uses

the same SSID for establishing the wireless connection.

In this mode you have to set the Channel number you