User Manual

15
3.2 Configuration Utility
WLAN USB dongle uses its own management software. All functions controlled by
user are provided by this application. When you plug WLAN USB dongle into the USB
port, a new icon- should appear in your icon tray
automatically wait a while. If the icon is in red, it means that WLAN USB Dongle
configuration is invalid or incomplete.
Double click on that icon the screen is shown below.
User can navigate through “cards”, by clicking or tapping them with a stylus.
In the following we explain the use and meanings of the various card.
Monitor
The field shows the association to available Access Point with Operating
Mode, Channel, Tx Rate Power Management mode and MAC Address of
WLAN USB Dongle. When the state is “Associated” means normal flow of
operation in infrastructure mode. The PC is connected to Access Point.
BSSID is chose in the form of hex digits.