User's Manual

Wireless LAN PC Card User’s Guide
51
Peer to Peer -This is the 802.11b Ad Hoc mode of operation. All
communication is done from Client to Client without the
use of an Access Point. 802.11 Ad Hoc network uses
the same SSID for establishing the wireless connection.
In this mode you have to set the Channel number you
want to use.
Peer-to-Peer Channel
When you choose Peer-to-Peer as the Network Type, you have to set the
channel number you want to use.
Transmit Rate
The transmission rate at which client of AP transmits the data packets. You
can set this to Auto 1 or 2Mb, 5.5Mb, 11Mb or Fully Automatic.
“OK” button
This button becomes active only when one of the fields has been modified.
Pressing this button applies the changed values to the driver and saves them
to the registry and is used the next time the computer boots up