User's Manual

Wireless LAN PC Card User’s Guide

Step 9. Set IP address and Subnet Mask. You can select either Static or DHCP

setting. If you choose to use DHCP, the DHCP server will assign an IP

address to your PDA. If you use the static IP setup, please enter the IP

address and subnet mask. You should ask your network administrator for an

address, and then type it into the blank boxes as below. When this process is

finished, click OK. Then the new settings will take effect immediately.

DHCP Setting Example Static Setting Example

Step 10. If you have a specific server address, please type it into the DNS blank.

And then click OK.