Quick Installation Guide WA-7310 © All rights reserved. All trade names are registered trademarks of respective manufacturers listed. This manual may not be copied in any media or form without the written consent of original maker.
Quick Installation Guide of WLAN Broadband Router ※ To avoid users without access right through your WLAN Broadband Router, suggest that use security mechanism like WEP, WPA or set ID/password for web configuration login IP address 192.168.1.254. Preparation 1 At lease one PC with IEEE802.11b/g/n WLAN client installed. 2 One straight-through Category Ethernet cable, used to link WAN interface to xDSL or CM for Internet connection. 3 WLAN Broadband Router.
Quick Installation Guide of WLAN Broadband Router L2TP IP Address . . . Subnet Mask . . . Server IP Address . . . User Name Password LAN configuration IP Address . . . Subnet Mask . . .
Quick Installation Guide of WLAN Broadband Router ACT WPS Flashing Data is transmitting or receiving on the LAN interface On Port linked. Off No link. Push continually the reset button 5 ~ 10 seconds to enable the WPS feature.
Quick Installation Guide of WLAN Broadband Router Reset Interfaces Description LAN The RJ-45 sockets allow LAN connection through Category 5 cables. Support auto-sensing on 10/100M speed and half/ full duplex; comply with IEEE 802.3/ 802.3u respectively. RS (Reset) Push continually the reset button 5 ~ 10 seconds to reset the configuration parameters to factory defaults.
Quick Installation Guide of WLAN Broadband Router Installation Step One – Power On WLAN Broadband Router Connect DC Power Adapter to WLAN Broadband Router and the wall power socket. Notice: It will take about 50 seconds to complete the boot up sequence after powered on the WLAN Broadband Router; Power LED will be active, and after that the WLAN Activity LED will be flashing to show the WLAN interface is enabled and working now. Step Two – Configure WLAN Broadband Router 1.
Quick Installation Guide of WLAN Broadband Router 2. Click “Setup Wizard” in submenu of Site contents 6 of 10 Click “Next>>” button to go next.
Quick Installation Guide of WLAN Broadband Router 3. Configure Time Zone Setting configuration Click “Next>>” button to go next. IP Address: 192.168.1.254. Subnet Mask: 255.255.255.0. Click “Next>>” button to go next. 4. Configure LAN Interface Setup 5. WAN Interface Setup 6. 7 of 10 WAN Access Type: Select WAN connection of ISP provides. WAN Options: Static IP, DHCP Client, PPPoE, PPTP, L2TP Click “Next>>” button to go next.
Quick Installation Guide of WLAN Broadband Router 6. Wireless Basic Settings Band: 2.4GHz(B+G) Mode: AP Network Type: disabled SSID: MyWLAN Channel: 11 Enable Mac Clone: disabled Click “Next>>” button to go next. 7. Wireless Security Setup 8 of 10 Encryption: None Options: WEP, WPA (TKIP), WPA2 (AES), WPA2 Mixed Click “Finished” button to close setup session.
Quick Installation Guide of WLAN Broadband Router Step Three – Connect WLAN client to WLAN Broadband Router wirelessly On your wireless client PC: 1. Move your mouse to the Network icon on the Task bar and right click the mouse button to bring up the pop-up menu. 2. Click the View Available Wireless Networks on the pop-up menu. 2 1 3. Select the specific WLAN network (SSID) from the 3 Available Networks list. 4 9 of 10 4.
Quick Installation Guide of WLAN Broadband Router The wireless network diagram of WLAN Broadband Router.. Reference Please consult the user’s manual of WLAN Broadband Router for detailed and complete operation guide.
Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
