User's Manual

USER’S MANUAL OF WLAN TRAVEL AP/ROUTER Version: 1.0
67
IP Address
Subnet Mask
Default Gateway
Manually Specify the packets arrive at the destination.
The internal network can be avoided through the Internet
of the packet exchange.
Metric Fill in the Metric value. The default value is empty.
Interface Click to select LAN or WAN interface.
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset
b
utton to abort change and recover the
previous configuration setting.
Show Route Table Click button to show route table
Reset Click the Reset button to abort change and recover the
previous configuration setting.
Enable Virtual Server
IP Address
Protocol
Public Port Range
Comment
Comments let you know about whys to allow data
packets forward to the IP address and port number.
Apply Changes Click the Apply Changes button to register the IP address
and port number to Port forwarding list.
Reset Click the Reset
b
utton to abort change and recover the
previous configuration setting.
Delete Selected
Delete All Click to delete all the registered entries from the
port-forwarding list.
Reset Click the Reset
b
utton to abort change and recover the
previous configuration setting.