User's Manual

USER’S MANUAL OF WLAN TRAVEL AP/ROUTER Version: 1.0

4 Software Configuration

There are web based management and configuration functions allowing you to have the jobs

done easily.

The WLAN Travel AP/Router is delivered with the following factory default parameters on the

Ethernet LAN interfaces.

Default IP Address: 192.168.1.254

Default IP subnet mask: 255.255.255.0

WEB login User Name: <empty>

WEB login Password: <empty>

4.1 Prepare your PC to configure the WLAN Travel AP/Router

For OS of Microsoft Windows 95/ 98/ Me/XP:

1. Click the Start button and select Settings, then click Control Panel. The Control

Panel window will appear.

Note: Windows Me users may not see the Network control panel. If so, select View

all Control Panel options on the left side of the window

2. Move mouse and double-click the right button on Network icon. The Network

window will appear.

3. Check the installed list of Network Components. If TCP/IP is not installed, click the

Add button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK

button to install the TCP/IP protocol, it may need the Microsoft Windows CD to

complete the installation. Close and go back to Network dialog box after the TCP/IP

installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

9 IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is

good to connect the Wireless LAN Access Point.

9 IP Subnet Mask: 255.255.255.0

8. Click OK and reboot your PC after completes the IP parameters setting.

For OS of Microsoft Windows 2000, XP:

1. Click the Start button and select Settings, then click Control Panel. The Control

Panel window will appear.