User's Manual

USER’S MANUAL OF WLAN TRAVEL AP/ROUTER Version: 1.0

Side Description

Interfaces Description

WPS Push continually the reset button 5 ~ 10 seconds to enable the

WPS feature.

USB 1 The USB port is for power adapter

USB 2 Charge mobile device

2 Installation

2.1 Hardware Installation

Step 1: Place the Wireless LAN Travel AP/Router to the best optimum transmission

location. The best transmission location for your WLAN Travel AP/Router is

usually at the geographic center of your wireless network, with line of sign to all

of your mobile stations.

Step 2: Connect the WLAN Travel AP/Router to your wired network. Connect the

Ethernet WAN interface of WLAN Travel AP/Router by category 5 Ethernet

cable to your switch/ hub/ xDSL modem or cable modem. A straight-through

Ethernet cable with appropriate cable length is needed.

Step 3: Supply DC power to the WLAN Travel AP/Router. Use only the USB+AC/DC

power adapter supplied with the WLAN Travel AP/Router; it maybe occur

WPS

USB 1

USB 2