User Manual

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 1.0

3.3.3 Operation Mode

This page is used to configure which mode wireless broadband router acts

Screen snapshot – Operation Mode

Item Description

Gateway Traditional gateway configuration. It always connects

internet via ADSL/Cable Modem. LAN interface, WAN

interface, Wireless interface, NAT and Firewall modules

are applied to this mode

Bridge Each interface (LAN, WAN and Wireless) regards as

bridge. NAT, Firewall and all router’s functions are not

supported

Wireless ISP Switch Wireless interface to WAN port and all Ethernet

ports in bridge mode. Wireless interface can do all

router’s functions

Apply Changes Click the Apply Changes button to complete the new

configuration setting.

Reset Click the Reset button to abort change and recover the

previous configuration setting.

3.3.4 Wireless - Basic Settings

This page is used to configure the parameters for wireless LAN clients that may

connect to your Broadband Router. Here you may change wireless encryption