User Manual

USER’S MANUAL OF WLAN 11g Mini Router Version: 2.0
5
2 Installation
2.1 Hardware Installation
Step 1: Place the WLAN 11g Mini Router to the best optimum transmission location.
The best transmission location for your WLAN 11g Mini Router is usually at the
geographic center of your wireless network, with line of sign to all of your
mobile stations.
Step 2: Connect the WLAN 11g Mini Router to your wired network. Connect the
Ethernet WAN interface of WLAN 11g Mini Router by category 5 Ethernet
cable to your switch/ hub/ xDSL modem or cable modem. A straight-through
Ethernet cable with appropriate cable length is needed.
Step 3: Supply DC power to the WLAN 11g Mini Router. Use only the AC/DC power
adapter supplied with the WLAN 11g Mini Router; it may occur damage by
using a different type of power adapter.
The hardware installation finished.
2.2 Software Installation
 There are no software drivers, patches or utilities installation needed, but only the
configuration setting. Please refer to chapter 3 for software configuration.
Notice: It will take about 55 seconds to complete the boot up sequence after
powered on the WLAN 11g Mini Router; Power LED will be active, and
after that the WLAN Activity LED will be flashing to show the WLAN
interface is enabled and working now.