User's Manual

USER’S MANUAL OF WLAN 11G ROUTER Version: 1.0
26
the setting for IP address, subnet mask, DHCP, etc.
Screen snapshot – LAN Interface Setup
Item Description
IP Address Fill in the IP address of LAN interfaces of this WLAN
11g Router.
Subnet Mask Fill in the subnet mask of LAN interfaces of this WLAN
11g Router.
Default Gateway Fill in the default gateway for LAN interfaces out going
data packets.
DHCP Server Click to select Disabled, Client or Server in different
operation mode of wireless broadband router.
DHCP Client Range Fill in the start IP address and end IP address to allocate a
range of IP addresses; client with DHCP function set will
be assigned an IP address from the range.
Show Client Click to open the Active DHCP Client Table window that
shows the active clients with their assigned IP address,
MAC address and time expired information. [Server
mode only]
802.1d Spanning Tree Select to enable or disable the IEEE 802.1d Spanning
Tree function from pull-down menu.
Clone MAC Address Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?