User's Manual
USER’S MANUAL OF WLAN 11G ROUTER Version: 1.0
6
2 Installation
2.1 Hardware Installation
Step 1: Place the Wireless LAN 11g Router to the best optimum transmission location.
The best transmission location for your WLAN 11g Router is usually at the
geographic center of your wireless network, with line of sign to all of your
mobile stations.
Step 2: Connect the WLAN 11g Router to your wired network. Connect the Ethernet
WAN interface of WLAN 11g Router by category 5 Ethernet cable to your
switch/ hub/ xDSL modem or cable modem. A straight-through Ethernet cable
with appropriate cable length is needed.
Step 3: Supply DC power to the WLAN 11g Router. Use only the AC/DC power adapter
supplied with the WLAN 11g Router; it may occur damage by using a different
type of power adapter.
The hardware installation finished.
2.2 Software Installation
There are no software drivers, patches or utilities installation needed, but only the
configuration setting. Please refer to chapter 3 for software configuration.
Notice: It will take about 55 seconds to complete the boot up sequence after
powered on the WLAN 11g Router; Power LED will be active, and after
that the WLAN Activity LED will be flashing to show the WLAN
interface is enabled and working now.