晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Product Specifications CM-8822CU-V2 ac2x2+BT5.0 USB2.0 Version: 1.0 Manufacturer CC&C Technologies, Inc.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Revision History Version Date Change Description 1.0 09/23, 2019 Initial release 1.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview CM-8822CU-V2 is a WLAN 11ac and Bluetooth combo Module, provides a single USB interface to host, which fully supports the features and functional compliance of IEEE 802.11b/g/n/a/ac standards. Bluetooth v2.1 and v5.0 standards. It supports up to 866.7Mbps high-speed WLAN network connections and Bluetooth protocol stack.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 General Specification Model Name CM-8822CU-V2 Product Name ac2x2+BT5.0 USB2.0 Standard IEEE 802.11b/g/n/a/ac/ Bluetooth v2.1/v5.0 Data Transfer Rate Modulation Method Frequency Band WLAN: 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:0&6 WR IRU +7 0+] 0&6 WR IRU +7 0+] 802.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 5 to 90 % maximum (non-condensing) Humidity Size 25 x 12 x 2mm (L x W x H) RF Output Power (Average) (tolerance _±1 dBm) WLAN 2.4G 802.11b@CCK 11Mbps 802.11g@OFDM 54Mbps 802.11n@MCS15_HT20 802.11n@MCS15_HT40 Ant 0 (dBm) 19.5 18 17 17 Ant 1 (dBm) 19 18.5 18.5 18.5 MIMO (dBm) N/A N/A 17 14 EVM < 8% < -25dB < -28dB < -28dB WLAN 5.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Pin outs: Pin Signal Input /Output Description WPS Pin(Active High), shared with GPIO3 General Purpose Input/ Output Pin. When this function is not required, external pull-down resistor is required. DC 3.3V 1 WPS Input 2 VDD Power 3 HSDM I/O USB 2.0 Transceiver Differential Pair 4 HSDP I/O USB 2.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 The external circuit for WiFi activity LED display The external circuit for WiFi activity WPS display (When this function is not required, external pull-down resistor is required.
晶訊科技股份有限公司 CC&C Technologies, Inc. Block Diagram 8 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Placement Notice In order to get a better RF performance, please don’t put any trace or copper plane under Black frame of the module. RF out Please have the impedance of feed lines to be 50 ohms from RF output pin to Antenna.
晶訊科技股份有限公司 CC&C Technologies, Inc. 50 Ohm Feed line: H1: 20 ~ 60 mil Er1: 4.2 W1: 20 mil W2: 20 mil D1: 5 mil C1: 0.7 mil C2: 0.7 mil T1: 1.4 mil (1 oz) Impedance: 51 ~ 53 Ohm 10 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 PCB Layout footprint The recommended layout pads for CM-8822CU-V2 module are shown below. (Module top view) All dimensions are in millimeters.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Tolerance: +- 0.2mm Reference Temperature Reflow Chart Note: 1. If the system PCBA is double side design please reflow the side without this module first. 2. Don’t let the solder machine temperature over 250℃ or follow solder paste vender’s recommended temperature. 3.
Instructions to the OEM/Integrator: This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC/ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, Additional FCC/IC approvals must be obtained. ⚫ The OEM must comply with the FCC labeling requirements.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
