User Manual

2
General Specification
Model Name
CM-43438-V1
Product Name
11n + BT WiFi module(SDIO)
SDIO interface for WLAN and HS-UART interface for Bluetooth
Standards
IEEE 802.11b/g/n/d/e/h/i
Bluetooth v2.1+EDR/ v3.0/ v3.0+HS/ v4.1
Data Transfer Rate
WLAN:
802.11b: 11, 5.5, 2, 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n: MCS0 to 7 for HT20MHz
Bluetooth:
Basic rate: 1Mbps
Enhanced data rate: 2, 3 Mbps
High Speed: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Modulation Method
WLAN:
802.11b: CCK, DQPSK, DBPSK
802.11g: 64QAM, 16QAM, QPSK, BPSK
802.11n: 64QAM, 16QAM, QPSK, BPSK
Bluetooth: 8DPSK, π/4 DQPSK, GFSKFSK
Operating Channel
WLAN 2.4GHz:
11: (Ch. 1-11) United States
13: (Ch. 1-13) Europe
14: (Ch. 1-14) Japan
BT 2.4GHz:
Ch. 0 to 78
Frequency Range
2.4GHz ISM band (2.400GHz to 2.4835 GHz)
Spread Spectrum
WLAN IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)
WLAN IEEE 802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing)
Bluetooth: FHSS (Frequency Hopping Spread Spectrum)
RF Output Power
(tolerance ±1.5dBm)
WLAN:
17dBm 802.11b@11Mbps
15dBm 802.11g@6Mbps
15dBm 802.11g@54Mbps
13dBm 802.11n@MCS0_HT20
13dBm 802.11n@MCS7_HT20
Bluetooth:
Output Power : Class1
Network architecture
WLAN:
Ad hoc mode (Peer-to-Peer)
Infrastructure mode
Software AP
WiFi Direct
BT:
Pico Net
Scatternet
Receiver Sensitivity
WLAN:
-76dBm 802.11b@11Mbps
-65dBm 802.11g@54MBps
-64dBm 802.11n@MCS7_HT20
Bluetooth:
-89dBm@1Mbps
-90dBm@2Mbps
-83dBm@3Mbps
OS Support
Windows XP/ Linux/ Android
Security
WLAN: WEP, WPA Personal, WPA2 Personal, WMM, WMM-PS(U-APSD), WMM-SA, WAPI,
AES(Hardware Accelerator), TKIP(host-computed), CKIP(SW Support)