User's Manual

4. Using BTool
TostarttheapplicationgointoyourprogramsbychoosingStart>Programs>TexasInstruments>
BLECC254x‐1.4.0>BTool.OnStart‐upyoushouldbeabletosettheSerialPortSettings.Setthe“Port”
valuetotheCOMport.Fortheothersettings,usethedefaultvalues.Press“OK”toconnecttotheUSB
Dongle.

Whenconnectedyoushouldseethescreenpresented.Thescreenindicatesthatyounowhaveaserial
portconnectiontotheUSBDongle.Thescreenisdividedupintoafewsections:theleftsidebarcontains
informationontheUSBDonglestatus.Theleftsideofthesub‐windowcontainsalogofallmessagessent
fromthePCtotheUSBDongleandreceivedbythePCfromtheUSBDongle.Therightsideofthe
sub‐windowcontainsaGUIforcontroloftheUSBDongle.
