User's Manual

6.1 Pairing Steps:
1. Turn off the unit.
2. Press and hold
about 3 seconds to enter pairing mode.
3. Both blue and red LED light will flash during pairing stage.
4. Make the connection by following the instructions of mobile
devices.
5. Enter the default code “0000”, when the system requests for
password.
6. When pair up with mobile devices, the blue LED light will
also blink within regular interval in addition to the red
blinking LED signal. (No special indication from LED when
pair up with PC devices, only the red blink initiated from the
stand-by mode will blink in regular interval.)