User's Manual

- 26 -
There are some conditions which will stop the printing process:
1. Inks 100% run out.
2. Paper Jam.
3. Printer is BUSY.
4. Printer is not turned on.
When the above conditions occurred, PC will pop out a failed to print message
on the screen one minute later. User can clean the problem and continue the
printing after.
INKs run out - Replace new INKs for your printer.
Paper Jam - Remove jamed paper.
Printer BUSY - Check if there is any error in feeding paper to the printer.
Some printers may have problem in feeding paper. The
sympton looks like Paper Empty. You can push a button on
printer to let it retry. Read the printer manuals to know how to
do it. If it is impossible to continue, then you have to cancel the
printer job.
5. Paper empty.
If it is out of paper, this screen
will pop out.
Printer Combo Adapter will continue the printing if the error condition is
cleaned. It will not stop unless you cancel it.
Example:
Cancel an out of paper job.
You can read the following
paragraphs to know how to
cancel a printing job, or how to
reset a Bluetooth operation.