User Manual

NOTE : This driver is needed only if you are using a USB Bluetooth Dongle, and you

want to use it to communicate with RS-232 Serial Adapter. Skip this section if you are

not using it.

This software is not included in our RS-232 Serial Adapter package. We assume you

already purchased a Bluetooth USB dongle and it is already bundled with this software.

We also assume you already installed this driver in your PC. If NOT, please read the

following messages to learn how to do it.

This Widcomm Driver is accompanied with the Bluetooth USB dongle product you

purchased. Try to download the latest version.

There are other Bluetooth services which Widcomm driver provides. We will only

emphasize on the cable replacement service, and you may try to know other services by

you own.

The following steps tell you how to install the Widcomm driver.

Note: If you bought the extra software, BLINK, it will be automatically installed while

you install software.

Step 1:

Put Widcomm Driver CD into CD drive of your PC,

an Auto-install program will start to guide you to

complete the installation step by step. You also

can find Setup.exe from the given Widcomm

Driver CD, double click on it, the installshield

wizard dialog box will open,

click Next.

Step 2:

Accept the software license agreement.

Click Next.

WIDCOMM BLUETOOTH SOFTWARE DRIVER