BT-0310 Bluetooth Keyboard USER’S MANUAL Version 1.
BLUETOOTH KEYBOARD USER’S MANUAL REGULATION INFORMATION The Bluetooth Keyboard must be installed and used in strict accordance with the manufacturer’s instructions. This device complies with the following radio frequency and safety standards. FCC (Federal Communications Commission) This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
BLUETOOTH KEYBOARD USER’S MANUAL LICENSED SOFTWARE © Copyright 2000 – 2003, WIDCOMM, Inc. (“WIDCOMM”). All rights reserved. Warning: This software and accompanying documentation are protected by copyright law and international treaties. Unauthorized reproduction or distribution of this software, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
BLUETOOTH KEYBOARD USER’S MANUAL Contents 1. Introduction ......................................................................... 5 2. Introducing Bluetooth Keyboard....................................... 6 3. Hardware Installation.......................................................... 8 4. Create a Bluetooth Keyboard Connection .......................
BLUETOOTH KEYBOARD USER’S MANUAL 1. Introduction Welcome to join Bluetooth wireless world. This installation guide contains introductions for setting up the Bluetooth Keyboard. System Requirements Processor: Intel Celeron / Pentium III / Pentium IV; AMD Duron / Athlon Operating System: Microsoft Windows 2000 / XP Bluetooth USB Dongle Device Widcomm software version 1.
BLUETOOTH KEYBOARD USER’S MANUAL 2.
BLUETOOTH KEYBOARD USER’S MANUAL Multimedia Function Keys WWW-Back Volume up WWW-Forward Volume down WWW-Refresh Mute WWW-Stop Next track Search Previous track Favorites Stop WWW Play/pause E-mail Media select Sleep Keyboard Displays Shows when Num Lock, Cap Lock, Scroll Lock are turned on. Bluetooth status LED shows when Low Battery indicator and flashing when keyboard connected with host. All LEDs flashing when keyboard is in the discoverable mode.
BLUETOOTH KEYBOARD USER’S MANUAL 3. Hardware Installation The keyboard uses 4 pieces of alkaline batteries. Rechargeable batteries are not recommended. Step1. Remove the battery compartment cover from the bottom of Bluetooth keyboard. Step2. Insert the batteries. Make sure that the “+” and “-“ in each battery matches the “+” and “-“ on each slot. Step3. Put the cover on.
BLUETOOTH KEYBOARD USER’S MANUAL 4. Create a Bluetooth Keyboard Connection Open a connection to a Bluetooth Human Interface Device using one of these techniques: Step1. Press Connect Button on back of keyboard Step2. Double chick “My Bluetooth Places” Icon Step3.
BLUETOOTH KEYBOARD USER’S MANUAL Step4. Select setup scheme, then press “Next” Step5.
BLUETOOTH KEYBOARD USER’S MANUAL Step6. Select Device, then press “Next” Step7.
BLUETOOTH KEYBOARD USER’S MANUAL Step8. Input PIN Code on the screen from Bluetooth keyboard, then press “Enter” Step 9.
