User's Manual

BTW-CE User’s Guide Using Remote Services
33
To use Dial-up Networking:
1. Create a shortcut to the device that will provide telephone access (see
Section 3.2.1.1).
2. From the Bluetooth Manager, My Shortcuts tab, tap-and-hold the Dial-up
Networking connection shortcut, and then select Connect from the pop-up menu.
3. On the first Bluetooth: New Dial-up Connection screen (Figure 22, left), double-
tap New Connection…
4. On the second Bluetooth: New Dial-up Connection screen (Figure 22, right):
a) Enter a name for the connection
b) If dialing outside of the default country setting, enter the country code
c) If dialing outside of the default area code setting, enter the area code
d) Enter the phone number to be dialed.
5. Tap OK
To proceed with the connection, you must complete the Windows CE screen(s) that
follow(s). Refer to the Windows CE documentation for assistance.
After the connection is active, open a web browser on the Pocket PC.
Figure 22: Dial-up Networking, overview (composite screenshot)