User manual

7
1
1
3
5
2
4
6
Warning! Use only ltered/
bottled water in this machine!
Do not put any other liquid or food
in the water tank, except as
instructed in the descaling section of
this instruction book.
Safety and Indicator
Symbols
Priming machine before rst use
Fill the water tank with ltered/bottled water.
The beverage buttons and alarm indicator light will blink
simultaneously.
Press the long espresso button once. Wait approximately 2 minutes
for the machine to complete the priming cycle. During this cycle, the
alarm indicater light will blink. The alarm light will go o and the 3
beverage buttons will blink to conrm the end of the priming cycle.
Repeat this step only if the alarm indicator light continues to blink.
Plug into grounded outlet, then turn power switch on.
Place an ample container under the beverage dispensing spout.
If required, empty water from the used capsule drawer. Your machine
is now ready for use.
11CBV_BB_ManualS04_USA.indd 7 12/21/10 1:44 PM