CBM OPOS Driver Setup Guide CBM OPOS Driver Setup Guide November 26, 2004 Rev. 2.3 Japan CBM Corporation 5-68-10 Nakano, Nakano-Ku, Tokyo 169-0001 JAPAN Tel 81-3-5345-7540 Fax 81-3-5345-7541 info-sys@jcbm.co.jp http://www.jcbm.co.
CBM OPOS Driver Setup Guide 1. INSTALLATION .........................................................................................................................2 2. INSTALLATION CONFIGURATION........................................................................................6 3. UNINSTALLATION....................................................................................................................7 4. PRINTER SETTING TOOL.............................................................
CBM OPOS Driver Setup Guide 1. INSTALLATION The following explains the installation procedure required for using this product. Description is made by taking the installation procedure of CBM1000 as an example. procedure applies to other CBM POS printers. Note: For the printer DIP switch, refer to the description in “Setting Printer”. 1. Before installation, be sure to close all other open applications. 2. Run Setup.exe on Setup Disk 1 supplied with the printer. When the Setup.
CBM OPOS Driver Setup Guide Carefully read the software license agreement and click [Yes]. Choose the directory where you wish to place the application program. To change the destination folder, click the [Browse...] button.
CBM OPOS Driver Setup Guide Choose the setup type you want. Normally select “Typical”. Click [Next] to start copying files. When copying files is completed, the setting tool starts automatically. Perform printer setting. (Refer to “Printer Setting Tool”.
CBM OPOS Driver Setup Guide Installation has finished. Click [Finish]. Remarks: If the parallel interface printer is used, when the PC is started, it is required to install printer driver by driver install wizard. To stop the install wizard, it is necessary to install printer driver. Please refer to the manual that comes with driver for the details of printer driver.
CBM OPOS Driver Setup Guide 2. INSTALLATION CONFIGURATION The following describes the files to be installed with the product. :\Program Files\OPOS\CBM Driver (Folder you specified at installation) (Folder to store device driver) CBMDrvUnInstall.exe CBMDrv.sys Include Opos.h Opos.hi OposPtr.h OposPtr.hi OposCash.h OposCash.hi OposCBM.h OposAll.bas OposCBM.bas Manual (Folder to store library header) (Folder to store manual) ApplicationDevelopmentGuide.pdf SetupGuide.
CBM OPOS Driver Setup Guide 3. UNINSTALLATION The following describes uninstallation of the product. Delete registry Delete printer and drawer using printer setting tool. When you want to keep the printer setting, this step is not required. (In the OPOS upgrading, keeping the printer setting is recommended.) Delete OPOS Choose CBM OPOS from “Adding and deleting application” of Control Panel and delete it.
CBM OPOS Driver Setup Guide 4. PRINTER SETTING TOOL The following describes the printer setting tool (CBMconfig.exe). The setting tool can be started by “CBMOPOS” - “CBMConfig” from the start menu. This is automatically installed at the time of installation. Main Screen Device View Setting View Device View A list of added devices is shown. It is displayed in tree structure of Physical device - Logical device. Selects each device and changes the setting in the setting view.
CBM OPOS Driver Setup Guide 5. ADDING A NEW PRINTER This procedure helps you add a new printer. Select “Create new printer” button Printer” in “Right-Click Menu”. , “Create new printer” in “Device” menu, or “Add New Adding new printer wizard starts. Selects the printer type you want to add and click [Next]. Referring to Printer’s manual, select paper size and maximum number of digits. After selection, click [Next].
CBM OPOS Driver Setup Guide Select the port you want to use. Click [Next]. If parallel connection is available, selecting either Serial interface or Parallel interface is required. Follow the interface setting referring to the printer’s manual. After setting, click [Next].
CBM OPOS Driver Setup Guide Referring to Printer’s manual, perform the setting of serial interface or the setting of parallel interface setting. After setting, click [Next]. Perform details setting. Unless otherwise specified, keep the set value and click [Next].
CBM OPOS Driver Setup Guide Adding a drawer If you have any drawer you want to connect, select the number of drawers. If you have no drawer to be connected, the following step is omitted. Setting 1st drawer Referring to the manual, perform setting. If you have two drawers to be connected, click [Next] and follow the same setting for 2nd drawer.
CBM OPOS Driver Setup Guide Click [Finish] to add a printer and a drawer.
CBM OPOS Driver Setup Guide 6. ADDING NEW DRAWER This procedure helps you add a drawer to the printer. Select “Create new drawer” button Drawer” of “Right-Click Menu”. , “Create new drawer” in “Device” menu, or “Add New Adding new cash drawer wizard starts. Select the printer to which the drawer is added and the number of drawers to be connected and click [Next]. Perform the setting on the 1st drawer. Referring to the manual, perform setting.
CBM OPOS Driver Setup Guide Click [Finish] to add a drawer. 7. ADDING LOGICAL DEVICE This procedure helps you add a logical device to the printer and drawer. Select the printer or drawer to which a logical device is added, select “Add device” button “Add logical device” of “Device” menu, or “Add Device” of “Right-Click Menu”. , Enter a logical device name you want to add and click the [Add] button. 8.
CBM OPOS Driver Setup Guide 9. SETTING PRINTER Please check DIP switch setting and memory switch setting of the printer follows followings. Please refer to User’s manual for the details. Setting List of DIP Switch SW No.
CBM OPOS Driver Setup Guide Setting List of Memory Switch SW No.
CBM OPOS Driver Setup Guide 10. FIRMWARE VERSION OF PRINTER For CBM-1000II-PF(Parallel interface）, please make sure the firwmare version is later than V3.16000. The firmware before V3.16000, OPOS driver does not work.
