User`s manual

User’s Manual
51
1. Select the mask zone that will be erased (e.g. 01).
2. Press <ENTER> to confirm the selection. Consequently, the screen will
display the instructions to reset after the mask is cleared.
3. Select <RESET> under the CLEAR MASK item and press <ENTER> to
proceed with resetting.
• MASK DISPLAY
This item is used to set the time to display a privacy mask.
FIRST
If select this mode, the camera will detect the mask zone at the next preset
position and display the mask in advance, and then pan the dome to the
preset point.
LAST
If select this mode, the camera will move the dome to the preset point, and
then display the mask zone.
• EXIT
Exit the PRIVACY MASK page and go back to the MAIN PAGE 3 to carry on
setup of time related setting.
23×/35× Model:
3.3.22 TIME SETTING
The time setting function is used to set the TIME related parameters of the integrated
high speed dome. Each item in the menu is listed as follows.
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES
TIME SETTING
TIME DISPLAY OFF
SET YEAR 05
SET MONTH 10
SET DAY 02
SET HOUR 12
SET MINUTE 12
EXIT+SAVE
YES