User`s manual

User’s Manual
45
If use 23× and 35× models, after exiting the ALARM SETTING menu, go back
to the MAIN PAGE 3 to carry on setup of WDR function. Thus please skip the
next section and go to 3.3.20 WDR FUNCTION to continue setup of WDR
function.
23×/35× Model:
If use the 22× model, please skip the next three sections and go to 3.3.22 TIME
SETTING.
22× Model:
3.3.19 ALARM DETECT (18×/26× Model)
This function instructs the camera to detect movement within the monitoring area and
then send an alarm signal automatically. Before activating this function, alarm
connection setups must be completed in advance.
• DETECT SWITCH
This option is used to enable or disable the ALARM DETECTION function.
• DETECT MODE
Four alarm detection modes are provided for different applications.
MAIN PAGE 3
IR FUNCTION NONE
ALARM SETTING ENTER
WDR FUNCTION NONE
PRIVACY MASK NONE
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES
ALARM DETECT
DETECT SWITCH OFF
DETECT MODE INT FOCUS
EXIT YES