User`s manual

User’s Manual

• HOME FUNCTION

The item is used to enable or disable the HOME function. Use the left/right

direction keys of the control keyboard to change the setting.

• SELECT MODE

Select one of the modes that the PTZ Camera should execute when the

HOME function is enabled and the RETURN TIME expires. The options

include <AUTOPAN>, <SEQUENCE>, <CRUISE> and <PRESET>. Use the

left/right direction keys of the control keyboard to change the setting, and the

items below will change in cooperating with your selection.

• PRESET POINT

Select a preset point where the PTZ Camera should go after the Return Time

function, which will be mentioned later, is activated. The preset point(s)

should be set prior either in the PRESET setup menu or through the

keyboard.

SEQUENCE LINE

Select a sequence line that the PTZ Camera should execute after the

Return Time function is activated. The sequence line(s) should be

defined prior either in the SEQUENCE setup menu or through the

keyboard.

AUTOPAN LINE

Select an auto-pan line that the PTZ Camera should execute after the Return

Time function is activated. The auto-pan line(s) should be defined prior either

in the AUTOPAN setup menu or through the keyboard

CRUISE LINE

Select a cruise line that the dome camera should execute after the Return

Time function is activated. The cruise line should be defined prior either in the

CRUISE setup menu or through the keyboard.

• RETURN TIME

The camera starts to count down RETURN TIME when the dome idles, and

then execute the SELECT MODE function when the return time is up. The

RETURN TIME ranges from 1 to 128 minutes.

HOME SETTING

HOME FUNCTION OFF

SELECT MODE

PRESET

PRESET POINT 001

RETURN TIME

001 MIN.

GO ENTER

EXIT YES